Maintenance of the Pneumatic conveying system
Pneumatic conveying system can be successfully applied to the production. in addition to the careful and serious design, manufacture, installation and operation, the daily maintenance is also very important,especially the pneumatic conveying system should work in a sealed condition.A lot of the problems are not easy to find.So the timely maintenance is of great importance.
The pneumatic conveying system in general can be divided into the: gas source machinery, air ducts, feeder, feeding tube, fork, separator, discharger, dust, dust removal system and electric control system and other parts. Now the maintenance of all parts of narrative is as follows:
1. The maintenance of feeder Because the feeder has a variety of structures, so it is difficult to list in the respective points of maintenance, and we can offer a brief description of the issues in intercommunity :
All rotating parts, such as leaf valve wheel feed tube, screw feeder, etc., be sure to check the wear conditions and ensure its good sealing performance; Bearing damage need to be changed in time to guarantee its good lubrication and to make the rotating flexible and light.
2. Air source machinery maintenance points: In the compression type pneumatic conveying system, air source machinery mainly refers to the air compressor and the roots blower.
3. The maintenance point of the air duct: Duct in carrying the pneumatic conveying system, after the dust collector to fan inlet and outlet fan to cap between the pipes.
Home > News > Maintenance of the Pneumatic conveying system 