Home > Dehumidifying Dryers Series > PE Gas Pipeline Dehumidifier

PE Gas Pipeline Dehumidifier

Author：niasi Date：2014-6-11 11:59:31 Source:en.dgniasi.cn

Large dehumidifying drying system

When you need to use large quantity of plastic and lower dew-point, you should choose DDS series large dehumidifying drying systems.

DDS series' capacity can reach 8000kg/h. This system includes honeycomb rotor dehumidier(8000m3/h) and insulation hopper

(10000L or 8000kg PET). After treatment, the highest rate of dry raw material can reach the nal moisture content below 0.004%.

Proudcts Features

1. Constant speed stirring uncrystallized designed so that the plastic does not stick

in the temperature of the crystalline phase of the process to form blocks；

2. Crystallization eciency is high and uniform；

3. It can simplify and improve the eciency of the raw material drying process；

4. Drying of the raw material can be performed at high temperature, and the drying

process can be used directly to the existing standard drying drum；

5. Process temperature can be accurately controlled by thermostat；

6. Increase the proportion of recycled material in the use of new PET material；

7. it is optional of the dehumidier that can directly perform the dehumidication work.；

8. Optional screw feeding device output the crystallized material quantitatively.

Specification

The specification is subject to change without prior notice.

Model	NCR-160L	NCR-450L	NCR-900L	NCR-1600L	NCR-2500L
Total Tray Capacity(Kg)	100	300	600	1000	1500
Mixing motor Power（KW）	0.25	1.1	1.5	1.5	2.2
Fan Power(Kw)	0.55	2.2	3	11	15
Electric Power(Kw)	12	24	48	86	134
Handling Capacity(kg/hr)	55	150	300	500	750

☆The voltage specification of the machine is 3￠,400V,50Hz.

Specification of the Drying Capacity

Material	Drying Temp	Drying Time	Specific Heat	Specific Gravity	Before Drying	After Drying	Drying Capacity
Material	Drying Temp	Drying Time	Specific Heat	Specific Gravity	Before Drying	After Drying	ND-30	50	80	120	150	200	300	400	500	700	1000	1500	2000	3000	4000
ABS	80	2-3	0.34	0.6	0.3	0.02	11	18	27	35	71	200	180	210	285	355	425	710	1065	1500	1600
CA	75	2-3	0.5	0.5	1	0.02	9	15	22	30	60	105	150	180	235	295	355	590	885	1200	1330
CAB	75	2-3	0.5	0.5	0.8	0.02	9	15	22	30	60	90	150	180	235	295	355	590	885	1200	1330
CP	75	2-3	0.6	0.6	1	0.02	11	18	27	35	71	90	180	210	235	355	425	710	1060	1500	1600
LCP	150	4	0.6	0.6	0.04	0.02	8	13	20	27	55	106	135	160	210	265	320	530	800	1150	1200
POM	100	2	0.35	0.6	0.2	0.02	16	27	40	53	105	80	265	320	425	530	640	1060	1600	1800	2400
IONOMER	90	3-4	0.55	0.5	0.1	0.04	7	11	17	22	44	160	111	133	177	220	265	442	663	750	1000
PA6/6.6/6.10	75	4-6	0.4	0.65	1	0.05	6	10	14	19	38	66	96	115	153	192	230	383	575	960	1040
PA11	75	4-5	0.58	0.65	1	0.05	7	12	17	23	46	58	115	138	184	230	275	460	690	780	1150
PA12	75	4-5	0.28	0.65	1	0.05	7	12	17	23	46	69	115	138	184	230	275	460	690	780	1150
PC	120	2-3	0.28	0.7	0.3	0.01	13	21	31	41	83	69	206	250	330	413	495	826	1238	1400	1860
PU	90	2-3	0.45	0.65	0.3	0.02	11	19	29	38	77	124	190	230	307	383	460	767	1150	1530	2080
PBT	130	3-4	0.3-0.5	0.7	0.2	0.02	9	15	23	31	62	115	155	186	248	310	372	620	930	1100	1600
PE	90	1	0.55	0.6	0.01	<0.01	32	53	80	106	212	93	531	637	850	1065	1275	2125	3185	3600	4800
PEI	150	3-4	0.6	0.6	0.25	0.02	8	13	20	27	53	318	133	160	212	265	320	530	800	1030	1370
PET	160	4-6	0.3-0.5	0.85	0.2	0.05	8	13	19	25	50	80	125	150	200	250	300	500	750	1150	1360
PETG	70	3-4	0.6	0.6	0.5	0.02	8	13	20	27	53	75	133	160	212	265	320	530	800	1030	1370
PEN	170	5	0.85	0.85	0.1	0.05	9	15	23	30	60	90	150	180	240	300	360	600	900	1150	1360
PES	150	4	0.7	0.7	0.8	0.02	9	15	23	30	60	90	150	180	240	630	360	600	900	1050	1400
PMMA	80	3	0.65	0.65	0.5	0.02	11	19	29	38	77	115	190	230	310	385	460	765	1150	1530	1730
PPO	110	1-2	0.4	0.5	0.1	0.04	13	22	33	44	88	133	220	265	355	440	530	885	1330	1730	2660
PPS	150	3-4	0.6	0.6	0.1	0.02	8	13	20	27	53	80	133	160	212	265	320	530	800	1030	1370
PU	120	2	0.27	0.6	0.4	0.02	16	27	40	53	105	160	265	320	425	530	640	1060	1600	1800	2400
PP	90	1	0.46	0.5	0.1	0.02	26	44	66	88	180	265	442	530	710	885	1060	1770	2655	3500	4000
GP(GP)	80	1	0.28	0.5	0.1	0.02	26	44	66	88	180	265	442	531	708	885	1062	1770	2655	3500	4000
PSU	120	3-4	0.31	0.65	0.3	0.02	8	14	22	29	60	85	145	173	230	290	345	575	865	1300	1485
PVC	70	1-2	0.2	0.5	0.1	0.02	13	22	33	44	90	135	220	265	355	442	530	885	1330	1730	2660
PAN(AS)	80	14-2	0.32	0.5	0.1	0.05	13	22	33	44	90	135	220	265	355	442	530	885	1330	1730	2660
TPE	110	3	0.7	0.7	0.1	0.02	13	20	30	40	85	125	205	250	330	413	495	826	1238	1650	1860

☆How to choose a model of the needed dehumidifier:

Int order to reach the best efficiency,please select 80% of the Drying Capacity Table

According to the needed material and its drying capacity, you can choose the correct model.

For example, if you want to dry the PET 80kg/hr , the ND-300 shall be the appropriate choice.

URL:http://en.dgniasi.cn/Dehumidifying-Dryers/312.html

Last：Dehumidifier in the Extrusion Industry
Next：PET Precrystallized Dehumidifier System

Home

PRODUCTS

NEWS

Home > Dehumidifying Dryers Series > PE Gas Pipeline Dehumidifier

PE Gas Pipeline Dehumidifier

Author：niasi Date：2014-6-11 11:59:31 Source:en.dgniasi.cn