HOT Series-high temperature oil temperature mold machine
HOT series-- high temperature oil temperature machine refers to the reaction kettle temperature control equipment, our oil heater in heated by high temperature after heat conduction oil pump in reaction kettle jacket or coil, through the reaction kettle material heat to heat material in reaction kettle. Cycle of oil and then returned to the reaction kettle heating oil heater. Cycle to a certain temperature to thermal insulation. HOT series, high temperature and oil temperature machine can bring cooling device. It can control the material cooling according to customer's different requirements of production process.
Conventional reaction kettle is heated by the boiler burning steam, heat the reaction kettle through steam, this way of reaction kettle has much advantage. But now our country advocates energy saving and environmental protection, coupled with the boiler for examination and approval, the year of careful and so on, the other also need professional boiler and boiler installation, etc. This is to use the reaction kettle manufacturer invisible increase trouble. Our company is a company specializing in the production of domestic large-scale power oil heater manufacturers,which is engaged in the temperature control equipment design and manufacturing.
The advantages of the oil heater:
1.Simple intallation£¨Generally it is installed near the reaction kettle. If it needs anti-explosion, it should be isolated,but the whole project will be smaller£»
2.Simple operation.No need to operate by professionals.After the simple training to the operators ,he can independently operate the machine, or he can just look at the manual operation; Not isolated cases, our company equipment can be made into explosion-proof oil heater.
3.Way of oil heating is heat cycling,so there is no medium consumption.
4.Oil heater's temperature control precision can be 1 degree, this cannot be done in a traditional boiler.
5.Do not need to be checked every year.Oil heater is the ideal heating equipment using the reaction kettle, oven, ect.
6.The reaction kettle oil heater has a better appearance than the traditional heavy boiler.
HOT series-- required parameters of the high temperature oil temperature type 1¡¢Temperature control medium:water or oil?This is important.
2¡¢The chamber and height of the reaction kettle and the level above the ground. are important.
3¡¢The thickness and the volume of the jacket, the interface size are important
4¡¢The material weight inside the reaction kettle.
5¡¢Kinds of the material, the temperature ratio of the material, the time of adding to the temperature.
6¡¢Detailed process flow of the material temperature control is important
7¡¢Ask whether customer ever matched the mold temperature machine, if so, ask how much of a pump and the heating power,how is the effect, have any problems.These are important
8¡¢The weight and the size of the reaction kettle.£¨For reference and inquiry£©
9¡¢The reaction kettle and machinethe connection tube length and diameter between the reaction kettle and the machine£¨For reference and inquiry£©
For selecting the specific heating power and the pump ,we provide the relevant parameters.The technology department give the customer a selection scheme or for reference through calculation and the experience.
Home > Mold Temperature Controller > HOT Series--High-temperature Oil Temperature Machine
